I am searching for the Intel(R) PRO/100 Intelligent Server Adapter version 2.30.00.0000 (NDIS 5 driver) and have not been able to find it. I see the latest version 2.32 here but i need version 2.30.

https://downloadcenter.intel.com/product/50454/Intel-PRO-100-Intelligent-Server-Adapter

Can anyone help me locate it? Thanks

Hello,

after the update to Windows 10 (x64, Build 10240) the creation of a teaming group (static or IEEE802.3ad) with a I211+I217-V NIC fails.

Drivers have been upgraded to the latest version available and multiple reinstallations with reboots din't help either. Whenever the group creation wizzard is used and a groupname (several tried), the adapters and LACP have been selected, a Windows pop-up appears to tell me group creation has failed.

However the Windows Device Manager shows a newly created "Intel Advanced Network Services Virtual Adapter", so some kind of configuration seems to get done.

Using Windows 7 SP1 x64 the exact same setup worked flawlessly for months, so Win10/the driver are the likely culprit.

Is anyone experiencing similar problems and/or is this a known bug? Feedback on this issue is greatly appreciated.

Thanks in advance!

Kind regards,

Famaku

All,

My integrated nic stopped working after windows 10 upgrade. The newest drivers from the Intel site does not fix the issue. I even tried the drivers for 8.1, 8, and Windows 7. None of them work. Nic is integrated into a Maximus IV Gene-Z motherboard. Nic will not connect to the Internet. Upgraded to Windows 10 from a Windows 7 install where the nic was working without issues.

Any advice would be greatly appreciated!

Thanks!

Hi,

May I know the mechanical dimension of this ethernet card (E10G42BFSR)?
The datasheet which we have download from Intel website does not have the overall height profile that we need.

The dimension is based on the L and W. It doesn’t have the overall height as we need to know if the heatsink will protrude beyond the bracket.

We are concern that the height of the heatsink on the Intel Server adapter card might block our chassis as we are installing it on a 1U system.

Please help to advise the mechanical dimension of the card. Thanks.

Best Regards,

Chong

Hi Community,

I recently updated my new PC from Win 8.1 to Win 10. All was working well for 5 or so days...then...came home to find internet would not connect.

Tried updating to Win10 drivers - no difference. 3 other older PC's on same network updated to Win 10, no problems.

MSI board - X99A SLI Plus.

I notice that despite uninstalling and reinstalling the adapter that network connection number stays at (2). In the past when I have done this the connection number increases. Makes me wonder if it is actually fully uninstalling?

The driver properties shows the newly installed driver, is shown as working and normal LAN access is working OK.

Would editing the registry for this device help with a full uninstall. If so, does anyone have a reference I should be looking for in the registry?

Any help on this very frustrating problem would be really appreciated.

I have a motherboard with Intel 82563EB on board. I upgraded this machine to windows 10 (everything was working fine in win 7) and there's no compatible drivers from your site, or from msft updates or from the mb manufacturer. Does anyone know any trick to get this working? It's frustrating.

I've tried installing the w 8.1 drivers and it says wrong OS.

I've tried in compatibility mode and it says I don't have intel adapter installed.

Any ideas? Whill these get supported soon? I know it's an old chip but seriously this machine is more powerfull than most of our newer systems and I don't want to retire it because the Intel NIC doesn't work.... ( everything else does).

MD is a Tyan i5400XT

Hi,

I have a problem with the installation of the Intel PRO 1000 PT dual port on a Win 10 PC.

When I open SetupDB.exe with administrative rights, it says that there are no Intel NICs present on the system.

Windows already displays the 2 adapters on the devmgmt.msc and installed the default drivers.

Although the adapter works with the default win drivers, I want to use the ANS options for teaming.

I downloaded the latest driver for Win 10 x64.

Is this a known issue or is there any work around for this?

Many thanks

Chris

Ho aggiornato win7 a win10 senza alcun problema su 2 desktop (collegati entrambi a router Fastweb 20 mega con cavo ethernet) e un tablet Asus (da win8 a win10) collegato allo stesso router WiFi. Sul tablet connesso WiFi nessun problema, sui 2 desktop connessi con scheda di rete intel Intel(R) 82566DM-2 Gigabit Network Connection tutto bene tranne che il fatto che i browser vanno a singhiozzo a volte la pagina si scarica in pochi secondi il più delle volte sia Chrome che Edge (ma ho provato anche Opera e Firefox) danno "pagina non raggiungibile" magari pochi secondi dopo la pagina si apre senza problemi ma la pagina successiva si blocca di nuovo.

Su uno dei due desktop sono tornato a win7 e tutto ha ricominciato a funzionare. Qualcuno ha una spiegazione/soluzione ? C'è un problema di compatibilità tra le scehede di rete Intel e win 10 ?

My PC (HP Media PC M7183C) came with the above adapter. My ISP is Comcast and I am paying for their Blast service which is supposed to give me at least 105 mbps.

Running a speed test I am getting download speeds in the low 70 mbps. I had a Comcast tech come to my home and he connected his laptop to my network and he was able to achieve speeds well in excess of the 105 mbps. His indication to me is that perhaps my network card is not functioning correctly or the settings for the card need to be changed. The driver version I am running is 8.0.47.0 which is dated 12/6/07.

Are there actually settings that could be changed for this adapter or is it possibly too old to achieve a faster download speed or should it be replaced?

We recently purchased an Intel X710-DA2 Converged Network Adapter to provide both 10G network and FCoE connectivity to Cisco Nexus 5000 switches. This is installed in an Intel Server System S2600GZ server running Windows 2012 (non-R2).

The Intel drivers and ProSET were installed from the v20.2 drivers CD, however there was no option as described in the documentation to select FCoE.

Do I need to enable the boot ROM, even though we do not want to boot from SAN, to enable FCoE? If so, where do I find the BootUtil for Windows 2012?

Thanks

Hi all,

I've installed FreeBSD 10.2-STABLE on a server with 2*CPU E5-2643v3 (with HyperThreading on) and Intel XL710 4*10G SFP+ card.

At first I updated FreeBSD drivers to 1.4.0 (from download.intel.com).

I see next strange thing - Every acive ixl interface creates 24 queues (6 core *2 (HT) *2 CPU) but uses only 16-17 of them:

irq284: ixl0:q0                164383663       1941

irq285: ixl0:q1                371238730       4384

irq286: ixl0:q2                378286557       4468

irq287: ixl0:q3                365073427       4312

irq288: ixl0:q4                371116376       4383

irq289: ixl0:q5                372589584       4400

irq290: ixl0:q6                361879025       4274

irq291: ixl0:q7                354607200       4188

irq292: ixl0:q8                223602267       2641

irq293: ixl0:q9                199067474       2351

irq294: ixl0:q10               212598000       2511

irq295: ixl0:q11               202534854       2392

irq296: ixl0:q12               212050675       2504

irq297: ixl0:q13               209106917       2469

irq298: ixl0:q14               201452403       2379

irq299: ixl0:q15               203896634       2408

irq300: ixl0:q16                76328643        901

irq301: ixl0:q17                    6030          0

irq302: ixl0:q18                    5433          0

irq303: ixl0:q19                    6804          0

irq304: ixl0:q20                    6098          0

irq305: ixl0:q21                    6603          0

irq306: ixl0:q22                    6476          0

irq307: ixl0:q23                    7141          0

irq309: ixl1:q0                161169757       1903

irq310: ixl1:q1                402042077       4748

irq311: ixl1:q2                399166615       4714

irq312: ixl1:q3                389702886       4602

irq313: ixl1:q4                383371508       4528

irq314: ixl1:q5                388621686       4590

irq315: ixl1:q6                385533771       4553

irq316: ixl1:q7                390478220       4612

irq317: ixl1:q8                232313544       2743

irq318: ixl1:q9                248387076       2933

irq319: ixl1:q10               233942388       2763

irq320: ixl1:q11               237794942       2808

irq321: ixl1:q12               227292626       2684

irq322: ixl1:q13               222151566       2623

irq323: ixl1:q14               234209020       2766

irq324: ixl1:q15               217878026       2573

irq325: ixl1:q16                80177041        947

irq326: ixl1:q17                      83          0

irq327: ixl1:q18                      74          0

irq328: ixl1:q19                     201          0

irq329: ixl1:q20                      98          0

irq330: ixl1:q21                      95          0

irq331: ixl1:q22                      91          0

irq332: ixl1:q23                      87          0

# top -aSCHP

last pid: 28661;  load averages:  7.06,  6.35,  6.23                                                                                                                                                                      up 0+23:35:07  17:15:12

391 processes: 31 running, 215 sleeping, 145 waiting

CPU 0:   0.0% user,  0.0% nice,  0.0% system, 39.4% interrupt, 60.6% idle

CPU 1:   0.0% user,  0.0% nice,  0.0% system, 48.8% interrupt, 51.2% idle

CPU 2:   0.0% user,  0.0% nice,  0.0% system, 42.1% interrupt, 57.9% idle

CPU 3:   0.0% user,  0.0% nice,  0.0% system, 40.2% interrupt, 59.8% idle

CPU 4:   0.0% user,  0.0% nice,  0.4% system, 41.3% interrupt, 58.3% idle

CPU 5:   0.0% user,  0.0% nice,  0.0% system, 37.0% interrupt, 63.0% idle

CPU 6:   0.0% user,  0.0% nice,  0.0% system, 35.8% interrupt, 64.2% idle

CPU 7:   0.0% user,  0.0% nice,  0.0% system, 39.0% interrupt, 61.0% idle

CPU 8:   0.0% user,  0.0% nice,  0.0% system, 22.0% interrupt, 78.0% idle

CPU 9:   0.0% user,  0.0% nice,  0.0% system, 26.0% interrupt, 74.0% idle

CPU 10:  0.0% user,  0.0% nice,  0.0% system, 17.7% interrupt, 82.3% idle

CPU 11:  0.0% user,  0.0% nice,  0.0% system, 19.3% interrupt, 80.7% idle

CPU 12:  0.0% user,  0.0% nice,  0.4% system, 25.2% interrupt, 74.4% idle

CPU 13:  0.0% user,  0.0% nice,  0.0% system, 23.6% interrupt, 76.4% idle

CPU 14:  0.0% user,  0.0% nice,  0.0% system, 22.4% interrupt, 77.6% idle

CPU 15:  0.0% user,  0.0% nice,  0.0% system, 26.8% interrupt, 73.2% idle

CPU 16:  0.0% user,  0.0% nice,  1.2% system,  1.6% interrupt, 97.2% idle

CPU 17:  0.0% user,  0.0% nice,  0.8% system,  0.0% interrupt, 99.2% idle

CPU 18:  0.0% user,  0.0% nice,  1.2% system,  0.0% interrupt, 98.8% idle

CPU 19:  0.0% user,  0.0% nice,  0.4% system,  0.0% interrupt, 99.6% idle

CPU 20:  0.0% user,  0.0% nice,  3.5% system,  0.0% interrupt, 96.5% idle

CPU 21:  0.0% user,  0.0% nice,  1.6% system,  0.0% interrupt, 98.4% idle

CPU 22:  0.0% user,  0.0% nice,  0.8% system,  0.0% interrupt, 99.2% idle

CPU 23:  0.0% user,  0.0% nice,  2.0% system,  0.0% interrupt, 98.0% idle

# netstat -I ixl0 -w1 -h

            input           ixl0           output

   packets  errs idrops      bytes    packets  errs      bytes colls

      235K     0     0       126M       300K     0       321M     0

      233K     0     0       114M       297K     0       312M     0

      232K     0     0       116M       300K     0       315M     0

      227K     0     0       108M       297K     0       316M     0

Where is the source of problem that network adapter doesn't utilize all queues ?

I need to enable PXE on an Intel 82573L Gigabit Ethernet Controller nic. The machine is running Solaris 11.The Linux version I downloaded requires a /lib/ld-linux.so.2 package that doesn't exist on my Solaris system.  Is there a Solaris version of BootUtil?

snowman58

I am trying to configure a XL710 interface card on Centos 7 with two 10G ports. The host is a DELL R610.

I have installed the latest drivers and up graded the firmware.

The network card does not come live - I have it connected to another R610 with IXGBE interfaces through a optical/copper interface - which shows that the optical interfaces of the XL710 are not live.

When I try yo use QCU to configure the interface it does not recognize the interface, but when I run nvmcheck4e it recognizes the interfaces.

Is my problem that I cannot set the configuration through QCU or is it something else?

Regards

John

My setup is as follows

[root@localhost Linux_x64]# uname -r

3.10.0-229.11.1.el7.x86_64

[root@localhost Linux_x64]# ethtool -i p1p1

driver: i40e

version: 1.3.38

firmware-version: 4.53 0x80001dc0 0.0.0

bus-info: 0000:04:00.0

supports-statistics: yes

supports-test: yes

supports-eeprom-access: yes

supports-register-dump: yes

supports-priv-flags: yes

[root@localhost Linux_x64]#

[root@localhost Linux_x64]# ./qcu64e

Intel(R) QSFP+ Configuration Utility

QCU version: v1.24.35.01

Copyright(C) 2015 by Intel Corporation.

Software released under Intel Proprietary License.

NIC B:D   Ven-Dev   Mode   Adapter Name

=== ===== ========= ====== ====================================================

No supported adapters detected.

[root@localhost Linux_x64]# ./nvmcheck64e

NVM Integrity Verification Tool v1.25.01.03

Using: Intel (R) PRO Network Connections SDK v2.25.1

Copyright (C) 2012 - 2015 by Intel (R) Corporation.

Software released under Intel(R) Corporation Propietary License.

Usage:

    /HELP           Displays supported commands with description.

    /?              Displays supported commands with description.

    /VERSION        Displays tool and QV SDK version.

    /DEVICES        Shows available adapters.

    /NIC=X          Selects a specific adapter (1-32).

    /VERIFY         Verify NVM Signature of selected card.

Technical support options:

    /HEADER         Show NVM header of selected card.

    /KEY            Show NVM key of selected card.

[root@localhost Linux_x64]# ./nvmcheck64e  -devices

NVM Integrity Verification Tool v1.25.01.03

Using: Intel (R) PRO Network Connections SDK v2.25.1

Copyright (C) 2012 - 2015 by Intel (R) Corporation.

Software released under Intel(R) Corporation Propietary License.

NIC B/D/F    Ven-Dev   MAC          ENA Branding string

=== ======== ========= ============ === =======================================

1) 04/00/00 8086-1572 6805CA305270 YES Intel(R) Ethernet Converged Network Ada

2) 04/00/01 8086-1572 ------------ N/A ------------

3) 08/00/00 8086-10BC 001B21B69F21 N/A Intel(R) PRO/1000 PT Quad Port LP Serve

4) 08/00/01 8086-10BC 001B21B69F20 N/A Intel(R) PRO/1000 PT Quad Port LP Serve

5) 09/00/00 8086-10BC 001B21B69F23 N/A Intel(R) PRO/1000 PT Quad Port LP Serve

6) 09/00/01 8086-10BC 001B21B69F22 N/A Intel(R) PRO/1000 PT Quad Port LP Serve

[root@localhost Linux_x64]#

Hi All,

Downloaded NVMUpdate for Intel XL710 adapters for Linux. Trying to run it with log. There is a messages in a log:

Intel(R) Ethernet NVM Update Tool

NVMUpdate version 1.25.20.03

Copyright (C) 2013 - 2015 Intel Corporation.

./nvmupdate64e -l log.txt

Warning: Unsupported base driver version 1.2.48 (min required 1.3.19)

Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710-4

Warning: Unsupported base driver version 1.2.48 (min required 1.3.19)

Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710

Warning: Unsupported base driver version 1.2.48 (min required 1.3.19)

Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710

Warning: Unsupported base driver version 1.2.48 (min required 1.3.19)

Warning: Not supported version of base driver for Intel(R) Ethernet Converged Network Adapter X710

Config file read.

Inventory

But at first I upgraded i40e drivers to 1.2.48. I don't see a driver more fresh than 1.2.48 on download.intel.com .

What should I do?

Hey all,

I'm using Intel 10 Gigabit 82599 NIC in a kvm environment in SR-IOV mode, and I have a few questions:

1. If I'm working with untagged traffic, is it possible to work with VFs in port-trunking mode? isn't there a possibility for a loop in that case?

    If it's possible, is there any configuration that should be done in the level of VFs or L2 classifier?

2. is it possible to move a multi-cast from one VF to another on the same PF? is there a configuration needed for that sake?

3. Is STP protocol supported when working with VFs?

4. Is it possible to start a VM which I attached a VF to, if the PF of this VF is down? (down in ifconfig terms)

Thanks a lot in advance,

Shaham

I'm not sure if I'm in the right place, but I need help removing an Intel Virtual Network Adapter from my system. I had 2 adapters setup in a LAG configuration, but something happened and now I have an Intel Virtual Network Adapter in my device manager under network adapters that I can't get rid of. I've removed and uninstalled every single network adapter in my system, but when I try removing or uninstalling this Virtual Network Adapter, nothing happens. Does anyone have any suggestions?

Is this the forum in which to ask about issues with the XL710 40Gb card?

I have a VM (VMWare virtual machine) on which I installed Windows 7.  The default Network Adapters are Intel(R) PRO 1000 MT for which I'm trying to configure VLAN tagging.  I downloaded the latest version of PROWinx64.exe and when I run it, it eventually throws the error, "No Intel adapters present..."

Despite the adapters appearing in the Device Manager

When I try to update the drivers, Windows tells me, "The best driver software for your device is already installed."

Hey all,

In my setup I have 2 PFs that on each of them I defined a single VF (p1p1 with VF 0 and p1p2 with VF 0).

I have a VM which I attached with these two VFs, and on my VM I defined these two ports as trunk group.

Problem is that when arp request is sent from my VM via one of the VF and comes back via the other VF it is dropped because MAC address does not match.

My question is - does SR-IOV support port trunking? How should it be configured?

Thanks,

Shaham