Hi

Sorry if I place it in wrong section.

I have sun quad port fastethernet adapter with intel fw21154be chipset and want to use it on PC with windows 7, but can't find any driver for windows

Can anyone send driver or link on it?

I had downloaded and installed the latest V22.10 of the above mentioned (PROWinx64Legacy.exe) on a Beckhoff IPC running windows 7 professional x64 Edition with SP1 for the purposes of NIC teaming of the installed intel adapters.  After the successful installation, I encountered the following:

(1)  I found that it takes a long time (around 8 to 10 secs) for the properties window of the various intel adapter to show up once it is accessed. The added tabs (like the Teaming, the Link Speed) also behaves the same and takes a long time (says 5 to 8 secs) to be activated and display its contents. This only affect the intel network adapters.  I installed the driver on two IPCs and the observation is the same. I try to uninstall and reinstall the driver on the same 2 IPCs with no improvement.

Is this normal or is this a bugs in the new latest driver? Anyone encounter the same?

(2) I had the following 4 intel adapters on the said IPC.

(a) x2 intel 82574L Gigabit Network adapter (on add on PCIxe Card)

(b) x1 intel I210 Gigabit Network adapter

(c) x1intel I219-LM Gigabit Network adapter

I am not able to team the two intel 82574L adapters as a team, it gives an error: each team must include at least one Intel server device or intel integrated connection that support teaming. However I am able to team one intel 82574L adapter with either the I210 or the I219_LM adapter as a team.

What is intel integrated connection? The intel 82574L adapters are not server adapters?

Hi Team,

We have Intel X710-DA4 NIC cards installed in our newly deployed Lenovo Thinkserver SD350. OS in the server is VMware ESXi 6.5

We are using other vendor SFP+ in the card but the card is not suppoting the SFP+. Link status is down and no led.

But the same SFP+ is working fine in Intel X520 NIC card in the same model server. X710 have driver i40e.

Please help to fix this issue.

Thanks!

Hi!

I try create team on my NIC cards.

One server i set up successful, but 2nd server show me BSOD and teamng menu looks here:

82576 card on board, 2 connections

pro/1000 is pci-e

How i can assign names back?

I have downloaded and installed the latest Intel Network Adapter Driver for Windows 7 (64-bit) marked as version 22.10. However, what ends up getting installed is version 22.9.6 which was the previous release.

Download Intel® Network Adapter Driver for Windows 7*

Not a big deal, everything functions fine, but is anyone else noticing this?

Hi!

I need to buy a network card Intel EXPI9301CT and want to know how to distinguish original card from counterfeit.

I know that original card have the following:

1) RJ-45 within opened bus pins and orange tape over it

2) Transformer 'Delta'

3) YottaMark golographic mark (for cards produced since 2009 year)

BUT cards I have seen in the market are differ from original one:

1) RJ-45 pinout contained in the black box

2) Transormer 'Pulse'

3) No any YottaMarks

They looks like as one the ebay page: INTEL EXPI9301CT Gigabit CT Desktop PCI-e Network Adapter 82574L Chipset NIC | eBay

Please help me to know how to distinguish original Intel expi9301ct:

1) Is Intel uses 'Pulse' transformers on its network cards? Is it means that the card is counterfeit?

2) Is YottaMark should be on ALL Intel cards?

Thank you!

"You cannot use other brands of SFP+ (10 Gbps) modules with these adapters".

Dear Intel you are loosing client. Today we have problem in our network, we have X710 cards but no working modules.. it is last time we buying it.

We need JHL6540 chip PCB design document, please send to me, thank you very much!

Hi all,

I'm doing intensive testing of OPNsense (firewall solution based on FreeBSD 11.0/11.1) with a device from Jetway with 10 embedded i211-AT NICs: JBC390F541AA :: HBJC390F541AA19B :: Intel Celeron Bay Trail J1900 3.5" SBC Barebone :: JETWAY COMPUTER CORP.

From time to time, the link is not responding any more. E.g. a ping to a neighbor system does not work any more. I do not get any hints in log files.

Only doing a "ifconfig igbX down" followed by a "ifconfig igbX up" fixes the issue.

I did extensive testing which I have documented here:

WAN link gone sometimes (igb driver, I211 nics), ifconfig d/u fixes it (forum.opnsense.org)

As I'm still seeing this issue from time to time, I'd like to ask this question here in case that anybody else has ever seen this issue before.

Best regards,

Werner

Teaming failover takes ~12 seconds using I210 adapters on Windows 10. Teaming failover with previous system configurations occurred under 1 second. The Wireshark capture is attached showing the data transfer from PC2 (192.168.28.72) to PC1 (192.168.28.71). The failover was induced after packet 368. Transfer resumes at packet 392 after ~12.6 seconds. Is it possible to reduce the failover time?

System Specs: ANS 22.10 driver, SFT teamed I210 adapters with default power management and default advanced settings, Windows 10.1.0 Enterprise Build 1607

Hi All,

I am using two DELL Poweredge R430 servers and each server has one dual port XL710-QDA2 [1]. Now we want to connect these two NICs directly using XLDACBL3 [2] cable, but we are not sure if the setup will work. On  server 1, we are running DPDK based L2Fwd application and on the other server DPDK-pktgen is generating the packets. Server 1 returns the packets back to server 2.

So can we use XLDACBL3 cables to connect these NICs directly and will they work in full-duplex mode?

[1]: Intel® Ethernet Converged Network Adapter XL710 10/40 GbE

[2]: QSFP+ Modules/Cables Compatible with Intel® Ethernet Server Adapter...

Thanks,

Anmol

I have recently found the PTP protocol was disabled on x710 due to security reason (L4 timestamping rejected, intel-SA-00063) . Just wondering any plan to enable PTP in the future?

It takes us more than one week to fix this problem, but failed. Our server is built as belows

Motherboard: Intel S2600CW2R

CPU: E5 2660 V4

Network Adapter: XL710-QDA2

OS: Linux Ubuntu 16.04

We are using Intel QSFP Configuration Utility to config ports as 4x10G mode. All NVMs and drivers have been updated to the latest version. Here are the details of our log file. Anybody could give us some help? Thanks in advance.

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ./qcu64e /DEVICES

[sudo] password for tb-user:

Intel(R) QSFP+ Configuration Utility

QCU version: v2.27.10.01

Copyright(C) 2016 by Intel Corporation.

Software released under Intel Proprietary License.

NIC Seg:Bus Ven-Dev   Mode    Adapter Name

=== ======= ========= ======= ==================================================

1) 000:004 8086-1583 N/A     Intel(R) Ethernet Converged Network Adapter XL710-

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ./qcu64e /NIC=1 /set=4x10

Intel(R) QSFP+ Configuration Utility

QCU version: v2.27.10.01

Copyright(C) 2016 by Intel Corporation.

Software released under Intel Proprietary License.

QSFP+ Configuration modification is not supported by this adapter.

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ ifconfig -a

enp1s0f0  Link encap:Ethernet  HWaddr a4:bf:01:1b:89:9e

          inet addr:150.236.28.199  Bcast:150.236.28.223  Mask:255.255.255.224

          inet6 addr: fe80::5622:3a76:5c53:30f4/64 Scope:Link

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:4079 errors:0 dropped:0 overruns:0 frame:0

          TX packets:322 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:472072 (472.0 KB)  TX bytes:38743 (38.7 KB)

          Memory:91920000-9193ffff

enp1s0f1  Link encap:Ethernet  HWaddr a4:bf:01:1b:89:9f

          UP BROADCAST MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

          Memory:91900000-9191ffff

ens261f0  Link encap:Ethernet  HWaddr 00:16:f6:f6:10:0a

          UP BROADCAST MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

ens261f1  Link encap:Ethernet  HWaddr 00:16:f6:f6:10:0b

          UP BROADCAST MULTICAST  MTU:1500  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

lo        Link encap:Local Loopback

          inet addr:127.0.0.1  Mask:255.0.0.0

          inet6 addr: ::1/128 Scope:Host

          UP LOOPBACK RUNNING  MTU:65536  Metric:1

          RX packets:138 errors:0 dropped:0 overruns:0 frame:0

          TX packets:138 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:12084 (12.0 KB)  TX bytes:12084 (12.0 KB)

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens3f2

Settings for ens3f2:

Cannot get device settings: No such device

Cannot get wake-on-lan settings: No such device

Cannot get message level: No such device

Cannot get link status: No such device

No data available

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens261f0

Settings for ens261f0:

        Supported ports: [ ]

        Supported link modes:   40000baseCR4/Full

                                40000baseSR4/Full

                                40000baseLR4/Full

        Supported pause frame use: Symmetric

        Supports auto-negotiation: Yes

        Advertised link modes:  40000baseCR4/Full

        Advertised pause frame use: No

        Advertised auto-negotiation: Yes

        Speed: Unknown!

        Duplex: Unknown! (255)

        Port: Other

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: off

        Supports Wake-on: g

        Wake-on: g

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: no

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ sudo ethtool ens261f1

Settings for ens261f1:

        Supported ports: [ ]

        Supported link modes:   40000baseCR4/Full

                                40000baseSR4/Full

                                40000baseLR4/Full

        Supported pause frame use: Symmetric

        Supports auto-negotiation: Yes

        Advertised link modes:  40000baseCR4/Full

        Advertised pause frame use: No

        Advertised auto-negotiation: Yes

        Speed: Unknown!

        Duplex: Unknown! (255)

        Port: Other

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: off

        Supports Wake-on: g

        Wake-on: g

        Current message level: 0x00000007 (7)

                               drv probe link

        Link detected: no

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$ lspci | grep Ethernet

01:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)

01:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01)

04:00.0 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)

04:00.1 Ethernet controller: Intel Corporation Ethernet Controller XL710 for 40GbE QSFP+ (rev 02)

tb-user@tbuser-S2600CWR:~/LinuxTool/Linux_x64$

Hello,

first of all im totally new with the SFP+ Cable.

i try to connect my Dlink DGS 1210 48 Switch with the Intel X520-2 Adapter on the Fileserve with an 3M SFP+ Cables|10GbE SFP+ Cable|Cisco/HP/H3C Compatible|CAB-10GSFP-P3M  ordered with the Intel standard XDACBL3M

The Dlink Switch has an Amber Light from at the Connection-Port ( in the Manual there is no amber status for this slot but nvm there is ANY light)

The Fileserver Adapter says "no network cable pluged". i tried to install a new driver from Intel but nothing happens. So i plugged the beginning and the End of the cable into the Intel Adapter and finally all the lights going to blink and the status switch to connected..

After some massiv abuse of Google i stumbled over all sort of Standards and every manufacture has its own, thats why you can buy dlink cables and intel cables and cisco and netgear and so on...

So my Situation is i cant set up anything on the Dlink Side at this Ports (enable or disable) and there is an amber light blink.. on the other side the Cable works with the Intel Adapter..

i searched for cables from Intel to Dlink Standards.. and just found one windy reseller in another country that have this sort of cable. So i think that is not the standard to get a workaround to this Dilema. So i want to ask what is the common workaround for this Problem ? Do IT Department wire the cable for themself or is there an Adapter or Software Solution ?

thank you for helping me out.

Badb3nd3r

Bonjour, 

Suite à mon passage à Windows 10 que je viens d'installé sur mon nouveau SSD, je rencontre un problème très bizarre, en effet, dès que j'allume mon pc je suis normalement connecté à internet et tout marche à merveille mais au bout d'un certain temps, (environ 5 à 10min) je perds complètement la connexion internet, je n'arrive plus à ouvrir aucune page ( pas même google).

PS : L’icône réseau en bas de l'écran n'affiche aucune anomalie.

J'ai beau essayé de mettre à jour mon driver Ethernet avec le dernier pilote fournis sur le site Intel, j'ai essayé de mettre à jour le Windows via Windows Update à la toute dernière version mais rien n'a changé! J'ai aussi essayé le reset des paramètres réseau par le biais des commandes sur "cmd" ça fonctionne au début mais par la suite le problème revient et c'est toujours après quelques minutes d'utilisation. J'ai pensé ensuite à faire une réinstallation complète du windows mais ça n'a pas solutionné le problème. Pour le moment, je me contente d'une solution de dépannage :

- Passer par la commande cmd suivante : ipconfig/flushdns qui fait immédiatement revenir la connexion internet bizarrement.

Autre info très importante qui peut aider, c'est que quand j'utilise skype ou autre logiciel qui utilise internet, ça continue à marcher malgré que je n'ai pas d'internet sur mon explorer, par contre, il ne faut pas que je quitte le logiciel pour le relancer, parce que ça ne marchera pas. On dirait que c'est une histoire de port ou je sais pas quoi ...

Pour info je dispose d'une carte réseau : Intel ethernet connection i219-v

Carte mère : Asus Z170 pro gaming

Processeur : Core i5 6600k

SSD : Samsung 850evo

RAM : Corsair 8Gox2

Merci pour votre aide d'avance.

my nic is 2 port x520: lspci | grep Ethernet

41:00.0 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)

41:00.1 Ethernet controller: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection (rev 01)

sr-iov enabled via : echo 4 > /sys/class/net/p1p1/device/sriov_numvfs

ip link show p1p1

p1p1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000

    link/ether 38:4c:4f:29:08:fc brd ff:ff:ff:ff:ff:ff

    vf 0 MAC 52:54:00:13:25:bc, vlan 99, spoof checking on, link-state auto, trust off, query_rss off

    vf 1 MAC 52:54:00:46:20:35, vlan 99, spoof checking on, link-state auto, trust off, query_rss off

    vf 2 MAC 52:04:0a:08:01:01, spoof checking on, link-state auto, trust off, query_rss off

    vf 3 MAC 52:04:0a:08:01:02, spoof checking on, link-state auto, trust off, query_rss off

and failed set link-state via: ip link set p1p1 vf 0 state enable

RTNETLINK answers: Operation not supported

i am using CentOS 7.4, and checked in ixgbe driver source from centos,there is no ndo_set_vf_link_state handler.

i also checked ixgbe driver from intel driver download from version 3.x to version 5.3.4(latest for now), and no ndo_set_vf_link_state implemention.

is there a plan to support ndo_set_vf_link_state? or some patch available?

thanks a lot.

Hello, 

Following my move to Windows 10 that I just installed on my new SSD, I encounter a very strange problem, indeed, as soon as I turn on my pc I am normally connected to the internet and everything works well but after a while, (about 5 to 10min) I completely lose the internet connection, I can not open any more pages (not even google).

PS: The network icon at the bottom of the screen does not show any anomalies. 

I tried to update my Ethernet driver with the latest driver provided on the Intel site, I tried to update the Windows via Windows Update to the latest version but nothing has changed! I also tried to reset the network settings through the commands on "cmd" it works at first but later the problem comes back and it's still after a few minutes of use. I then thought to do a complete reinstallation of the windows but it did not solve the problem.

For now, I'm getting a temporary solution: 

- Going through the following cmd command: ipconfig / flushdns which makes the internet connection come back.

Another very important info that can help is that when I use skype or other software that uses the internet, it continues to work despite that I do not have an internet on my explorer, however, if i leave the software to restart it, it will not work again.

FYI I have a network card: Intel ethernet connection i219-v

Motherboard: Asus Z170 pro gaming

Processor: Core i5 6600k

SSD: Samsung 850evo

RAM: Corsair 8Gox2 

Thank you for your help in advance.

Recently added Pro/1000 PT dual port card to the last PCIe2.0 slot on P8Z77-M Pro motherboard. slot was recently used for sound card and RAID card with no issues.

Added Pro/1000 PT NIC to Win10 Creators updated system and it came up working with no issues, streaming data, connecting to my NAS and everything, with ONLY that NIC being used.

Downloaded drivers and tools and try and get advanced features running but run into the same issue. ALL installers think there is no card in the system.

When I run the Intel Driver Support Assistant is tells me that the card is using driver version 9.13.41.3 dated 9/29/2011! and there are no software updates available and the device is working properly. Is this correct??

But yet any installer for Intel® Ethernet Adapter Complete Driver Pack versions 22.10, 22.9, 22.3 show the dreaded "No Intel Adapter are present in this computer"

Running the PROADMIN tool for the same version numbers just gets me a directory that had no further installer tools.

So far I have tried to uninstall the drivers/reboot/install drivers with no change in results.
Also have powered down, uninstalled card, reseated, and rebooted with no change.

Am lost and frustrated and just want to bond these damn ports.

I'm trying out mutlicast streaming of uncompressed HD and UHD video uisng VMs and SRIOV with an Intel X520-DA2 NIC (82599 Etherent Control VF).

I can send a mutlicast stream from a VM OK and receive a mutlicast stream on a VM using a SRIOV VF. I'm not using VLANs, just separate MAC/IP address on the same LAN.

If I have 2 VMs on the same host, using separate SRIOV VFs from the same Intel NIC, I can see multicast traffic on both VM interfaces (when only 1 VM has joined the stream).

I have tried turning allmutlicast & promisc mode on/off, but it seems to make no difference.

I can see the traffic using the network stats and using tcpdump in the unjoined VM.

Is this a feature of the NIC, or is there a way to stop traffic going to both VFs/VMs.

For the purpose of testing, I'm using KVM (Virtual Machine Manager) on Ubuntu 16.04, my setup is as follows:

$ lsb_release -a

Ubuntu 16.04.3 LTS, xenial

$ uname -a

Linux ap-z420-0 4.4.0-104-generic #127-Ubuntu SMP Mon Dec 11 12:16:42 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

$ lspci -nn | grep -i 'Ethernet Controller'

06:00.0 Ethernet controller [0200]: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection [8086:10fb] (rev 01)

06:00.1 Ethernet controller [0200]: Intel Corporation 82599ES 10-Gigabit SFI/SFP+ Network Connection [8086:10fb] (rev 01)

07:10.0 Ethernet controller [0200]: Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed] (rev 01)

07:10.1 Ethernet controller [0200]: Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed] (rev 01)

07:10.2 Ethernet controller [0200]: Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed] (rev 01)

07:10.3 Ethernet controller [0200]: Intel Corporation 82599 Ethernet Controller Virtual Function [8086:10ed] (rev 01)

# modinfo ixgbevf
filename:       /lib/modules/4.4.0-104-generic/updates/dkms/ixgbevf.ko
version:        4.2.2
license:        GPL
description:    Intel(R) 10 Gigabit Virtual Function Network Driver
author:         Intel Corporation, <linux.nics@intel.com>
srcversion:     0F89E29947DD944E62FA118

$ ip link show ens3f0
5: ens3f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether 90:e2:ba:72:70:e0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 52:54:00:1d:e1:aa, spoof checking on, link-state auto
    vf 1 MAC 52:54:00:1d:e1:ab, spoof checking on, link-state auto

Any suggestions gratefully received.

Hello,

I have purchased a new Asrock X99 Taichi. The motherboard has two network chips installed onboard:

1. Giga PHY Intel® I218V
2. GigaLAN Intel® I211AT

After trying to install the driver for my Windows Server 2016 operating system I receive the error message 'Not intel adapter available' I have try to install the original drivers from Asrock and Intel but both is not working?

Can anyone help on this issue,

Thanks in advanced